Panasonic AG-AF100A Operating Instructions Manual page 104

Setup menu list (continued)
SCENE FILE screen (continued)
Item
(Camera)
DETAIL LEVEL
(Camera)
V DETAIL
LEVEL
(Camera)
DETAIL
CORING
(Camera)
CHROMA
LEVEL
(Camera)
CHROMA
PHASE
(Camera)
COLOR TEMP
Ach
(Camera)
COLOR TEMP
Bch
(Camera)
MASTER PED
(Camera)
A.IRIS LEVEL
(Camera)
DRS
(Camera)
GAMMA
(Camera)
KNEE
52
Display
mode
Adjusts the level of the image outline correction (in the horizontal and vertical directions).
-7...0...+7
Adjusts the level of outline correction in the vertical direction.
-7...0...+7
Adjusts the level of noise reduction of the detail signal.
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
-7...0...+7
Adjusts the chroma level.
-7...0...+7
Adjusts the chroma level.
-7...0...+7
Make fine adjustments to the color temperature (after white balance Ach adjustment).
-7...0...+7
Make fine adjustments to the color temperature (after white balance Bch adjustment).
-7...0...+7
Adjusts the master pedestal (black level of the image) as the basis for images.
-15...0...+15
Sets the desired AUTO IRIS level.
-6...0...+6
Selects the DRS (Dynamic Range Stretcher) function. It enables the dynamic
range to be expanded by compressing the level of the video signals in the high-
brightness areas where overexposure results during normal shooting.
OFF, 1, 2, 3
• The higher the number of the setting, the higher the compression level of the
high-brightness areas.
• The higher the number of the setting, the greater the interference in darker areas.
Selects the gamma curves.
HD NORM: This gamma setting is suitable for HD shooting.
LOW:
SD NORM: This is the normal video setting carried over from the DVX100 series.
HIGH:
B.PRESS:
CINE-LIKE D: Uses a gamma curve designed to create cinema-like images.
CINE-LIKE V: Uses a gamma curve designed to create cinema-like images with
• When you select CINE-LIKE gamma, we recommend setting the lens aperture
lower than normal image level (approximately 1/2) for optimal results.
To avoid overexposure, select the compression level (knee point) of the high
intensity video signals received through the image pickup device.
AUTO: Sets the level automatically according to the received signals.
LOW: Low setting (Compression starts at approx. 80%)
MID: Medium setting (Compression starts at approx. 90%)
HIGH: High setting (Compression starts at approx. 100%)
• Not available when a DRS value is set, or when GAMMA is set to CINE-LIKE.
Description of settings
Makes a mellow image using the gamma curve that has a gentle
incline in low-brightness curve. The contrast sharpens.
Expands the tone of dark parts and makes a brighter image using the
gamma curve that has a sharp incline in low-brightness curve. The
contrast softens.
Makes the contrast sharper than LOW.
emphasized contrast.
indicates the factory setting.