Av In/Out Setup Screen - Panasonic AG-AF100A Operating Instructions Manual

Setup menu list (continued)

AV IN/OUT SETUP screen

Item
(Camera)
SDI & HDMI
(PB)
OUT SEL
(Camera)
SDI OUT
(PB)
(Camera)
SDI 24PsF
(PB)
(Camera)
SDI EDH
(PB)
(Camera)
DOWNCON
(PB)
MODE
(Camera)
HP MODE
(Camera)
TEST TONE
(Camera)
VIDEO SETUP
(PB)
(Camera)
AUDIO OUT
(PB)
58
Display
mode
Sets the output video format of the SDI&HDMI OUT terminal.
1080i/720P: Output at the resolution set in REC FORMAT.
DOWNCONV:
Sets the video output from the SDI terminal.
ON: Video is output from SDI OUT. At this point, simultaneous LCD display
and EVF display is not supported. Close the LCD monitor when using
EVF.
OFF: No video is output from SDI OUT.
Sets the video format output from SDI OUT to 24PsF.
ON: Operates only when REC FORMAT = 1080 24p. Does not operate
during VFR operation (when the recording format is other than 24p).
The HDMI output stops during 24Psf output.
OFF: SDI output is in the 1080 60i format.
• This item is not available when SYSTEM FREQ = 50Hz.
Sets superimposition of EDH on to the SDI output during SD SDI output.
ON: Superimposes EDH.
OFF: Does not superimpose EDH.
Switches down-conversion output mode.
SIDE CROP:
LETTER BOX: Letterbox mode (Adds black bands at the top and bottom of the
SQUEEZE: Squeeze mode (Squeezes images horizontally.
Selects the sound heard from the headphones.
LIVE: The sound input from the microphone is output as is. This setting is
selected when delays in the sound are annoying.
RECORDING:
The sound in the status to be recorded (the sound synchronized with the
images) is output.
Sets test tone output to channels 1, 2, 3, and 4 when BARS setting is ON.
ON: Outputs the test tone.
OFF: Does not output the test tone.
Sets the setup level of video signals.
0%: VIDEO OUT terminal output and recording setup levels will both be set
to 0%.
7.5%A: VIDEO OUT terminal output setup level will be set to 7.5%, while
recording setup level will be set to 0%.
• This item is not available when SYSTEM FREQ = 50Hz.
Sets the audio signals to output from the AUDIO OUT terminal (A/V OUT).
CH1/CH2:
CH1:
CH2:
• When an SD Memory Card containing 5.1 channel content recorded on another
equipment is played back on the camera, it is down-mixed to 2 channels when
output through the AUDIO OUT and headphone terminals.
Description of settings
SDI is output at 480i, while HDMI is output at 480p. (When
SYSTEM FREQ = 59.94) SDI is output at 576i, while HDMI is
output at 576p. (When SYSTEM FREQ = 50)
Side-crop mode (Crops the left and right edges.) Images may
extend beyond the boundaries of the screen and be partially unable
to be seen when outputting from the +H227A/V terminal or SDI
OUT terminal (during DOWNCONV), or the HDMI terminal (during
DOWNCONV).
image.
CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
indicates the factory setting.