5.5.11 Removing/Replacing the Sleep
To remove and replace the Sleep Switch Board Assembly, reference Figure
5-14 and perform the following procedure:
1.
2.
3.
4.
Sleep Switch Board Assembly
Figure 5-14 Sleep Board Assembly, Removal/Replacement
5-20 Field Service
Switch Board
Open up the base assembly as described in the previous paragraph
(Paragraph 5.5.6).
Unplug the cable connector from J11 on the Sound/PCMCIA Board.
Remove the screw securing the LED Board to the metal bracket above
the Expansion Bus Connector. Remove the LED Board assembly.
Replacement is essentially the reverse of Steps 1 through 4 above.
To Connector J12
on Main Board