Table of Contents
Advertisement
5.5.8
Removing/Replacing the IR Board
To remove and replace the IR Board, perform the following procedure:
1.
Open up the base assembly as described in the previous paragraph
(Paragraph 5.5.6).
2.
Remove the IR lens by bowing gently to the middle and removing lens.
3.
Using a straight slot screwdriver, gently pry the IR Board from its
connector. Remove the board from the notebook.
4.
Replacement is essentially the reverse of Steps 1 through 3 above.
Figure 5-11 IR Board, Removal/Replacement
IR Board
Field Service 5-17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
