Operation; Setting The Pulse/Tone Switch; Setting The Ringer Off/Low/Hi Switch - Aastra AT-200HT Owner’s Owner's Manual

Operation

Setting the Tone/Pulse switch
The AT-200HT telephone can operate in tone or pulse dialing
mode.
1. Set the PULSE/TONE switch located on the side of the
telephone to the desired position. See Figure 6
2. If you're not sure which service you have, set the PULSE/
TONE switch to the TONE position. Press the TALK button
and dial your number.
3. If the dial tone continues, you have pulse dialing service,
set the PULSE/TONE switch to the PULSE position.
Figure 6
Tone/Pulse Switch

Setting the Ringer Off/Low/Hi switch

Set the RINGER OFF/LOW/HI switch to the HI position for
normal ringer sound level. See Figure 7
14