Insert Hose; Accessory Storage - Craftsman 32724611 - 12 Gal. HP Wet/Dry Vac Owner's Manual

Assembly (continued)
Insert Hose
Insert the hose locking end of the "Pos-I-
Lock ®'` hose into the inlet of the Vac. The
hose should snap into place. To remove
the hose from the Vac, press the release
button in the hose assembly and pull the
hose out of the Vac inlet, as shown.
Press
; and
Pull
E:::::>
y
Storage Location
Accessory Storage
Your accessories may be stored in the
caster feet or in the storage locations on
the lid. The hose may be stored by wrap-
ping it around the unit and plugging the
open end into one of the storage loca-
tions on the caster feet.
Open End _
Of Hose
Hose
Power
Assembly
Push Button
End Of Hose