Care & Maintenance - VTech InnoTab 2 Baby User Manual

NOTE: Do not disconnect InnoTab
downloading. After you have finished, turn off the tablet to save power.
When not connected to a computer, please close the USB port cover
on the InnoTab
Care & Maintenance
1. Keep InnoTab
of heat.
2. Remove the batteries when not using it for an extended period of time.
3. Avoid dropping it. NEVER try to dismantle it.
4. Always keep your InnoTab
5. Please examine the toy transformer periodically for conditions that may
result in the risk of fire, electric shock, or injury to persons (such as damage
to the output cord, blades, housing, or other parts) and that, in an event
of such conditions, the transformer should not be used until properly
repaired.
Using the InnoTab
• Use only enough pressure to operate the game. Too much pressure may
damage the touch screen.
• Do not use the stylus if it is broken.
• Do not use any other type of stylus on the touch screen other than the
InnoTab 2 Baby stylus.
®
• Put the stylus back in the stylus holder when not in use.
Cleaning the InnoTab
• Slightly dampen a soft, lint-free cloth with a little water and wipe the screen
to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these two steps as
needed.
Cleaning the InnoTab
• Keep your InnoTab
use solvents or abrasives.
®
2 Baby for safety.
®
2 Baby out of direct sunlight and away from direct sources
®
2 Baby away from water.
®
2 touch screen and stylus:
®
Baby
2 touch screen
®
Baby
2 cabinet
®
Baby
2 Baby clean by wiping it with a slightly damp cloth. Never
®
2 Baby or the computer while files are
23