Table of Contents
Advertisement
KNOW YOUR BUFFER / POLISHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
APPLICATION BONNET
The reusable application bonnet is made of 100% terry
cloth.
BUFFING/POLISHING BONNET
The reusable polishing bonnet is made of synthetic tufted
material.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Buffer/Polisher
Application Bonnet
Polishing Bonnet
Operator's Manual
FEATURES
CORD
The buffer/polisher has a 6 ft. power cord.
FOAM PAD
The foam pad is 6 in. in diameter.
MOTOR HOUSING
The air vents for the motor are located on the sides of the
motor housing.
ON/OFF SWITCH
The on/off switch is located on the side of the buffer/
polisher.
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
9
Advertisement
Table of Contents
