Ryobi RB100 Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Sander
  5. RB100
  6. Operator's manual

Ryobi RB100 Operator's Manual

10 in. (254 mm) orbit -buffer/polisher
Hide thumbs
Table of Contents

Advertisement

Quick Links

THANK YOU FOR BUYING A RYOBI BUFFER/POLISHER.
Your new buffer/polisher has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new buffer/polisher.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your buffer/polisher properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
10 in. (254 mm) ORBIT -
BUFFER/POLISHER
MODEL RB100

SPECIFICATIONS:

Orbital Diameter
Rating
Input
No load Speed
Net Weight
10 in. (254 mm)
120 Volts, 60 Hz, AC
.75 Amps
3200 RPM
4.5 lbs. (2 kg)

Advertisement

Table of Contents
loading

Related Manuals for Ryobi RB100

Summary of Contents for Ryobi RB100

  • Page 1: Specifications

    4.5 lbs. (2 kg) THANK YOU FOR BUYING A RYOBI BUFFER/POLISHER. Your new buffer/polisher has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Table of Contents ................................2 General Safety Rules ..............................3-4 Specific Safety Rules And/Or Symbols ........................4-5 Applications ..................................6 Features ..................................7 Operation ................................... 8-10 Maintenance ................................10-11 Troubleshooting ................................11 Parts Ordering / Service ..............................12 WARNING: WEAR YOUR The operation of any buffer/polisher can result in foreign objects being thrown into your eyes, which SAFETY GLASSES can result in severe eye damage.

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES Personal Safety WARNING: Stay alert, watch what you are doing and use common sense when operating a power tool. Do not Read and understand all instructions. Failure to follow use tool while tired or under the influence of drugs, all instructions listed below may result in electric shock, alcohol, or medication.

  • Page 4: Specific Safety Rules And/Or Symbols

    GENERAL SAFETY RULES Check for misalignment or binding of moving parts, Service breakage of parts, and any other condition that may Tool service must be performed only by qualified repair affect the tool's operation. If damaged, have the tool personnel. Service or maintenance performed by serviced before using.
  • Page 5 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Minutes Time Alternating Current Type or a characteristic of current Direct Current Type or a characteristic of current No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute Revolutions, strokes, surface speed, orbits etc.

  • Page 6: Applications

    APPLICATIONS Your Ryobi buffer/polisher can be used to polish and buff just WARNING: about any high-gloss surface. The specially designed application bonnet and buffing bonnet are manufactured to This buffer/polisher is designed to buff and polish only. It is apply and remove waxes and polishes evenly, producing a equipped with a low-speed, low-torque motor.

  • Page 7: Features

    KNOW YOUR BUFFER/POLISHER Polishing Bonnet See Figure 1. Re-useable polishing bonnet is made of synthetic tufted Before attempting to use your new Ryobi buffer/polisher, material. familiarize yourself with all the safety rules listed in this Foam Pad Operator's Manual and the operating features shown below.

  • Page 8: Operation

    To avoid injury, always make sure the buffer/polisher is unplugged before attaching bonnets. Your Ryobi buffer/polisher comes with two bonnets, one for applying the polish to the surface and the other for buffing the surface. Both are fitted with a drawstring. The application bonnet is the one made of terrycloth.
  • Page 9 OPERATION APPLY POLISH TO SURFACE WARNING: See Figure 5. Do not wear loose clothing or jewelry and contain long hair WARNING: when operating buffer/polisher. They could get caught in moving parts, causing serious injury. Always wear safety goggles or safety glasses with side shields during operation.

  • Page 10: Maintenance

    MAINTENANCE WARNING: WARNING: When servicing use only identical Ryobi replacement Your buffer/polisher should never be connected to power parts. Use of any other parts may create a hazard or supply when you are making adjustments, attaching cause product damage. bonnets, cleaning the tool housing, or when not in use.

  • Page 11: Troubleshooting

    Check to make sure plug is properly seated in outlet. If using an extension cord, check connection and wire gauge. Problem with motor. Call your Ryobi authorized service center. Bonnet surface is creased or Drawstring is loose. Untie drawstring and retighten.

  • Page 12: Parts Ordering / Service

    Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

Table of Contents