unavoidable, use a residual current device (RCD) IMPORTANT! protected supply. Use of an RCD reduces the risk of electric shock. It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. PERSONAL SAFETY Subject to technical modification.
Page 3
■ Use the power tool, accessories and tool bits etc. in should be no binding or other conditions that may affect accordance with these instructions, taking into account proper operation. the working conditions and the work to be performed. ■ During each start-up, stand to one side of the grinder Use of the power tool for operations different from those sander and switch it ON.
■ Change the sanding belt frequently to maintain the ■ Store your spare grinding wheel carefully. product’s ability to effectively remove material. ● Keep the wheel inside the original package if possible. ● Store the wheel in a dry area at room temperature. ■...
If the power cord is damaged, it must be replaced by an authorised service centre in order to avoid a safety hazard. Belt rotation direction WARNING! For greater safety and reliability, all repairs should be performed by an Authorised RYOBI Service Centre. Visible radiation, instructional safeguard TRANSPORTATION AND STORAGE ■...
Page 7
Transparent screen Spark arrestor Wheel guard Sanding belt lock knob Sanding belt adjustment knob Work lamp Sanding belt Wheel dressing tool Work rest lock knob (sander) Work rest Sander guard Dust port Sanding belt guard Mounting hole x 2 On/off switch Water tray Work rest lock knob (grinder)
Page 8
1.6 mm - 2 mm > 2 mm 1.6 mm - 2 mm > 2 mm 1.6 mm - 2 mm > 2 mm Getting started...
Page 9
85º-90º D11 x D5 x 1.6mm Getting started...
Grinder Sander with a standardised test and may be used to compare Model RBGL250G one tool with another. They may be used for a preliminary assessment of exposure. Motor type Induction...
Page 20
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 20220419v4...
Need help?
Do you have a question about the RBGL250G and is the answer not in the manual?
Questions and answers