IBM 88861TU Planning Manual page 104

External network interface
I/O module IP Configuration
Network protocols
98
BladeCenter S Type 7779/8886: Planning Guide
DHCP
Host name
Static IP configuration (configure only if DHCP is disabled)
IP address
Subnet mask
Gateway IP address
IP address (default is 192.168.70.127)
Subnet mask
Gateway IP address
IP address (default is 192.168.70.128)
Subnet mask
Gateway IP address
IP address (default is 192.168.70.129)
Subnet mask
Gateway IP address
IP address (default is 192.168.70.130)
Subnet mask
Gateway IP address
SNMPv1 agent __ Enable
SNMPv3 agent __ Enable
Note: If you enable the SNMPv3 agent, you must configure
SNMPv3 settings for active login profiles in order for the
interaction between the SNMPv3 manager and SNMPv3 agent to
work properly.
SNMP traps __ Enable
SNMPv1 community Name: __________________
Access Type: ___Get ___ Set ___Trap
Host name or IP address (up to 3):
__ DHCP with rollover to static
__ DHCP only
__ Static IP only
_____._____._____._____
_____._____._____._____
_____._____._____._____
I/O module bay 1
_____._____._____._____
_____._____._____._____
_____._____._____._____
I/O module bay 2
_____._____._____._____
_____._____._____._____
_____._____._____._____
I/O module bay 3
_____._____._____._____
_____._____._____._____
_____._____._____._____
I/O module bay 4
_____._____._____._____
_____._____._____._____
_____._____._____._____
SNMP
___ Disable
___ Disable
___ Disable