IBM 88861TU Planning Manual page 56

Type 7779/8886
Hide thumbs Also See for 88861TU:
Table of Contents

Advertisement

For each login profile, specify:
v Login ID.
v Password.
v Role or Authority level. The role or authority level defines the command areas
v Access scope. The access scope defines where the role or user authority defined
In addition, you can specify an SNMP v3 profile for each user profile that includes
the following information:
v Name of the context in which this SNMP v3 user is working
v Authentication protocol used
v Privacy protocol used
v Privacy password to be used
v Access type (Get, Set, or Trap)
v Hostname/IP address for traps
Security settings
There are three levels of account security, which is set globally and applies to all
user profiles:
v Legacy security. This level of security has the following settings:
v High security. This level of security has the following settings:
v Custom security. With this level of security, you can specify the following:
50
BladeCenter S Type 7779/8886: Planning Guide
that a user can access, based on the access scope defined for that user. You can
specify one of the following for each login ID:
– Supervisor
– Operator
– Custom
for a user is valid, such as a specific BladeCenter S chassis or a group of blade
servers.
– No password is required.
– No password expiration.
– No restrictions on reusing passwords.
– No password change frequency restrictions.
– User accounts are locked for two minutes after five login failures.
– Passwords must adhere to simple password rules.
– No account inactivity monitoring.
– A Password is required.
– The password for the factory default USERID must be changed on next login.
– The password for all user IDs must be changed on first login, and passwords
expire in 90 days.
– There are restrictions on reusing passwords (last 5 passwords kept in history).
– There is a minimum interval of 24 hours between password changes.
– Account is locked for 60 minutes after five login failures.
– Passwords must adhere to complex password rules (at least two degrees of
difference from previous password).
– An alert is issued on account inactivity after 120 days.
– Accounts disabled after 180 days of inactivity.
– Whether a user login password required.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladecenter s

Table of Contents