Advanced Speed Dial Operation - Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual

Speed Dial
To store a Station Speed Dial Number using an Access Code
#66
1. Dial . The display shows "SPEED DIAL" and you hear Entry Tone.
2. Dial the Station Speed Dial number (100~199). The LCD shows your digits and you hear Entry Tone.
Selected telephones may have the ability to change System Speed Dial numbers. Follow this
Note
procedure but specify a System Speed Dial number (200~999) instead.
3. Enter the destination digits, then press
+ destination + #. You hear Success Tone.
4. Release the telephone. To enter another number, repeat the process, starting with
Step 1.
CTX System Administration
The third method of storing station Speed Dial numbers is via your CTX System Administrator, who
can establish your Station Speed Dial number through administrative software and associate a name
with it. This name is used by the Directory Dialling feature of DKT3014 large display telephones.

Advanced Speed Dial Operation

Special Characters
Speed Dial Numbers may include
(see above) it is also necessary to use
This creates 14 functions to be input from the 12 buttons on the dial pad.
Long Speed Dial Numbers
Speed Dial Numbers are stored sequentially in memory areas capable of holding 32 digits. If you
exceed 32 digits, the excess are stored in the next higher area and consume the next sequential Speed
Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits will be sent,
including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer be
available. You are not prevented from storing a new Number 101 but, if you do, Number 100 will be
shortened to 32 digits.
52
#
. The LCD shows "SPEED DIAL" + the Speed Dial Number
0 9 #
*
~ , , and Pause. When using the Access Code input method
#
to indicate you have finished entering the destination number.
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
Advanced Operation