Message Waiting; Responding To A Lit Msg Led - Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual

The Basics

Message Waiting

Msg
Use your
An extension can receive up to four simultaneous Message Waiting indications and LCD messages.
One message is reserved for the Message Center.
Your telephone can be programmed to have up to four additional (flexible) Message Waiting buttons/
LEDs. Check with your CTX System Administrator to see if these buttons have been programmed on
your telephone. If so, substitute them when the

Responding to a Lit Msg LED

1. On an LCD telephone, if you see a "+," press
Step 2. The "+" indicates additional messages. The LCD can show up to three station messages for
your extension and three for each additional (phantom) extension that you may have.
Msg
2. Press , then lift the handset. Your telephone rings the extension or voice mail device that sent the
indication. The LED continues to flash red.
3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3 above to retrieve them.
Voice mail devices turn off the LED/LCD indications after a short delay, after you checked all
messages.
5. To manually turn off your Msg LED, press your extension button, then press
each message received.
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
LED/button and LCD to see/retrieve message(s).
Msg
button/LED is mentioned in the following steps.
Scroll
to display additional messages; otherwise, go to
Message Waiting
#409
. Do this step for
13