Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual page 101

Delayed Ringing
Table 12 Feature Button Definitions (continued)
Button
Call Frwd No Answer
Call Frwd External
Caller ID
Directed Pickup
Do Not Disturb
DSS
Flash
Group Pickup
Line
Msg Wait
Night Transfer
Park in Orbit
Pooled Line Grp
Privacy on Line
Privacy Release
Program
PS/RES
88
Call Forward-No Answer – Press to forward calls to another station or voice mail device
when your station is not answered after 8~60 seconds (set at your station).
Call Forward-External – Press to forward Private or DDI line calls to an external or internal
telephone number.
Caller ID – Press to view the Call History list (may include name/number, date, status).
Call Pickup – Press to initiate a ringing Directed Call Pickup of outside line, extension, and
page calls.
Do Not Disturb – Press to lock your station in or out of the Do not Disturb mode.
Direct Station Selection(s) – Press to ring a preselected station. The LED associated with
each DSS button provides the status (idle/busy) of the station assigned to the button.
Flash – Press to perform the following functions: Disconnect and recall dial tone on a
outside line; access Centrex or PBX features; enter a pause or flash signal when
programming speed dial numbers.
Group Pickup – Press to pick up a call that is ringing a station that belongs to a Pickup
Group that your station is a member of.
Line – Press to answer or access an outside line.
Additional Messages Waiting
Press to control the system's outside line ringing pattern for after-hours incoming calls.
Park – Press to park internal or outside calls in an orbit. Call retrieval can be made locally
from the same parking telephone or remotely from a different telephone.
Pooled Line – Press to access an available outside line from a group of lines appearing
under one button.
Privacy – Press to block Privacy Override on common outside line buttons. This button
does not block Busy Override or Executive Override.
Privacy Release – Press to release privacy on common outside line buttons, enabling
other station users to enter your conversations on those buttons. Privacy release does not
apply to common extension buttons which are always private.
Program – Press to enter User Programming mode, which enables you to re-define
Flexible Buttons to perform other functions, including programming One Touch and
Flexible Buttons, register Call Forward assignments, assign Message Waiting Keys and
assign BGM sources played over the telephone speaker.
Pause/Resume – Press to pause or resume recording a conversation to a voice mailbox or
when playing back the recording.
Definitions
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
Button Labels