One Touch Buttons; Changing A One Touch Button - Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual

One Touch Buttons

One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialled numbers, such as Speed
Dial numbers (use Speed Dial Codes to store additional numbers). One-touch buttons can be
preassigned to your telephone – your System Administrator can help you identify them.
If you do not have a One Touch button, but you have an available Flexible button, you can convert the
Flexible button to a One Touch button. Perform the procedure called
Button's Function" on page 69
have created a One Touch button, you can change the function by using the following procedure.

Changing a One Touch Button

#9876
1. Press to enter User Programming Mode.
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialled. You can include the following in the
dial string:
Dial pad digits
A maximum of 32 characters.
Station and System Speed Dial index (or bin) numbers can be entered. The Speed Dial index
number will automatically dial out on the extension or Line programmed on the One Touch
button with the associated Speed Dial index number.
Function buttons, except One Touch or a
Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest writing the name or number of the One Touch button on your button strip.
70
(in Step 4, enter the access code for One Touch button). Once you
0 9
~ .To program special characters, see
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
"Setting/Changing a Flexible
Table 9.
Program
button.
User Programming