Removing The System From The Rack - Dell PowerVault MD1120 Installation Manual

Removing the System from the Rack

CAUTION:
the system from the mounting rails by yourself.
To remove the system from the rack, perform the following procedure:
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Disconnect the power cord and cables from the back of the system.
Figure 1-8. Removing the System From the Rack
1
1 mounting rails (2)
3 Unscrew both thumbscrews on the front panel of the chassis.
4 Slide the system completely out of the rack.
5 Place the system on a strong, stable surface.
18
Rack Installation Guide
Because of the size and weight of the system, never attempt to remove
2 thumbscrews (2)
2