Samsung SCV-3080 Series User Manual page 31

1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
6.DAY/NIGHT
2. Select a desired mode using the Function Setup switch according to the picture display you want.
AUTO : The mode is switched to 'Color' in a normal environment, but switches to 'B/W'
mode when ambient illumination is low. To set up the switching time for AUTO
mode, press the Function Setup switch. You can turn on or off the burst signal
on B/W mode.
- BURST MODE : You can turn on or off the burst signal on B/W mode.
- DURATION : You can select the day/night switching point.
- DWELL TIME : You can select day/night switching delay time from.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
Color ➞ B/W
Early
2.5 lux
Late 1 lux
* The day/night switching point of the camera can be adjusted.
EXTERN : This mode allows you to apply a desired filter to external signals.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
MAIN SETUP
DC
ATW
OFF
ON
AUTO
B/W ➞ Color
5 lux
7 lux
31
COLOR DOME CAMERA SCV-3080