Samsung SCV-3080 Series User Manual page 27

• White Balance may not work properly under the following conditions. In this case select
BACKLIGHT
The SCV-3080 is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, by adopting a function of the proprietary
SV-V DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function
2. Select a desired mode using the Function Setup switch depending on the camera purpose.
y
AWC SET : To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch.
If the environment changes, readjust it.
Notes
the OUTDOOR mode.
When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
When the ambient illumination of the subject is dim.
If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
Setup switch so that the arrow indicates 'BACKLIGHT'.
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
OFF : Not being used
BLC : Enables a user to select a desired area on a picture and view that area more clearly.
- LEVEL : Adjusts the brightness level of a monitoring area.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
MAIN SETUP
DC
ATW
OFF
27
COLOR DOME CAMERA SCV-3080