Operation; Preparing Documents; Acceptable Documents; Acceptable Cards - Panasonic KV-S1015C Operating Manual

Operation

Preparing Documents

Acceptable Documents

The acceptable documents for this scanner are as follows.
Document size:
48–216 mm
(1.9–8.5 in.)
Paper thickness for Feeding:
KV-S1026C: 20–209 g/m²
KV-S1015C: 40–209 g/m²
•
The height of all the documents on the tray should be less than 5 mm.
This compares to 50 sheets (80 g/m² or 20 lb.) of new paper.
•
With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2.8 in.).
•
Single paper feeding is recommended for papers exceeding the legal size length.
Recommended paper: Plain paper

Acceptable cards

ISO format card:
Size:
Thickness:
Embossed card is also acceptable.
•
A maximum of 3 cards can be loaded on the feed tray.
The height of the total cards (the total thickness including the embossing on each card) should be less than
5 mm (0.2 in.). Additionally, the embossing on each card must not get entangled with others.
•
Use the landscape orientation when scanning an embossed card.
If the scanning fails, place the card upside down, and then try again.
•
Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the
same time.
30 Operating Manual
70–2,540 mm
(2.8–100 in.)
85.6 x 54 mm (3.4 x 2.1 in.)
0.76 mm (0.03 in.)