Panasonic KV-S1015C Operating Manual page 58

Operating instructions
Hide thumbs Also See for KV-S1015C:
Table of Contents

Advertisement

Appendix
Symptom
The color of the scanned
document is extremely
different from the original
document.
Dark spots or noise appear on
the scanned documents.
There is noise or wave
patterns (moire pattern) on
the scanned image.
When you scan short
documents, the sound made
by paper being ejected will be
higher than usual.
If you still experience problems after following these suggestions, please contact our Technical Support
Department at 1-800-726-2797 for further assistance (U.S.A. only).
58
Operating Manual
Possible Cause
The settings of the computer monitor
are wrong.
The scanning glass is dirty.
The scanning resolution settings,
combined with patterns within the
scanned image, may cause this
problem.
If the length of a document is less than
about 148 mm, feeding speed control
will be activated for exiting
documents; this is normal behavior.
Remedy
Adjust the computer monitor settings.
Clean the scanning glass. (page 48)
Change the scanning resolution, and
perform scanning again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kv-s1026c

Table of Contents