Download Print this page
Allied Telesis AT-MC101XL Installation Manual

Allied Telesis AT-MC101XL Installation Manual

Allied telesis tv mount user manual
Hide thumbs Also See for AT-MC101XL:

Advertisement

4.
For the AT-PC232/POE or the AT-PC2002/POE, install
the AC power cord and secure it with the retaining clip
provided with the media converter as shown in
Figure 5, "Securing AC Power Cord with the Retaining
Clip".
SP EE
(M bp
D
DU PL
s)
EX
MO DE
AU TO
10
NE G
10 0
HA LF
FU LL
OF F
ON
1
2
2
3
1 2
4
2
P O R
T
1 0 0 -2
4 0 V A
C
~
1382
Figure 5 - Securing AC Power Cord with the Retaining Clip
5.
Install the mounting bracket on the DINRAIL. As shown
in Figure 6, "Mounting the Bracket on the DINRAIL",
the bracket may be oriented either with the bracket
screw above or below the DINRAIL.. Slide the hook
towards the DINRAIL until it is snug and then tighten
the bracket screw.
1519
Figure 6 - Mounting the Bracket on the DINRAIL
Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication
may be reproduced without prior written permission from Allied Telesis, Inc.
PN 613-001150 Rev B
DINRAIL Mounting Bracket
Installation Guide
Overview
This guide provides assembly instructions for assembling and
mounting a DINRAIL mounting bracket with one of the
following Allied Telesis products:
• AT-MC101XL, AT-MC102XL, AT-MC103XL and LH,
AT-MC104XL, and AT-MC605 Media Converters
• AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, and
AT-GS2002/SP Media Converters
• AT-PC232/POE and AT-PC2002/POE
Media Converters
• AT-FS201, AT-FS202, AT-FS232, AT-FS232/1, and
AT-FS232/2 Media Converters
Verifying the Package Contents
Make sure that these components are included in your
package:
• 10 DINRAIL mounting brackets
• 20 M3 mounting screws
• 10 tie-wraps
• This installation guide
If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
Assembling a DINRAIL Bracket and Meda Converter
1.
Find your media converter model in Figure 1, 2 or 3 on
pages 2 and 3 as listed here:
Figure 1
• AT-MC101XL
• AT-MC102XL
• AT-MC103XL and LH
• AT-MC104XL
• AT-MC1004
• AT-MC1008/GB
• AT-MC1008/SP
• AT-GS2002/SP
• AT-FS232
• AT-FS201
• AT-FS202
Figure 2
• AT-MC605
Figure 3
• AT-PC232/POE
• AT-PC2002/POE
Page 4
PN 613-001150 Rev B
4.
For the AT-PC232/POE or the AT-PC2002/POE, install
the AC power cord and secure it with the retaining clip
provided with the media converter as shown in
Figure 5, "Securing AC Power Cord with the Retaining
Clip".
SP EE
D
(M bp
DU PL
s)
MO DE
EX
AU TO
10
NE G
10 0
HA LF
FU LL
OF F
ON
1
2
2
3
1 2
4
P O R
2
T
Figure 5 - Securing AC Power Cord with the Retaining Clip
5.
Install the mounting bracket on the DINRAIL. As shown
in Figure 6, "Mounting the Bracket on the DINRAIL",
the bracket may be oriented either with the bracket
screw above or below the DINRAIL.. Slide the hook
towards the DINRAIL until it is snug and then tighten
the bracket screw.
Figure 6 - Mounting the Bracket on the DINRAIL
Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication
may be reproduced without prior written permission from Allied Telesis, Inc.
Page 1
PN 613-001150 Rev B
DINRAIL Mounting Bracket
Installation Guide
Overview
This guide provides assembly instructions for assembling and
mounting a DINRAIL mounting bracket with one of the
following Allied Telesis products:
• AT-MC101XL, AT-MC102XL, AT-MC103XL and LH,
AT-MC104XL, and AT-MC605 Media Converters
• AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, and
1 0 0 -2
4 0 V A
AT-GS2002/SP Media Converters
C
~
• AT-PC232/POE and AT-PC2002/POE
Media Converters
1382
• AT-FS201, AT-FS202, AT-FS232, AT-FS232/1, and
AT-FS232/2 Media Converters
Verifying the Package Contents
Make sure that these components are included in your
package:
• 10 DINRAIL mounting brackets
• 20 M3 mounting screws
• 10 tie-wraps
• This installation guide
If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
Assembling a DINRAIL Bracket and Meda Converter
1.
Find your media converter model in Figure 1, 2 or 3 on
pages 2 and 3 as listed here:
Figure 1
• AT-MC101XL
• AT-MC102XL
• AT-MC103XL and LH
1519
• AT-MC104XL
• AT-MC1004
• AT-MC1008/GB
• AT-MC1008/SP
• AT-GS2002/SP
• AT-FS232
• AT-FS201
• AT-FS202
Figure 2
• AT-MC605
Figure 3
• AT-PC232/POE
• AT-PC2002/POE
Page 4
PN 613-001150 Rev B
Page 1

Advertisement

loading

Summary of Contents for Allied Telesis AT-MC101XL

  • Page 1 Figure 6 - Mounting the Bracket on the DINRAIL Figure 3 Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. PN 613-001150 Rev B...
  • Page 2 Slide your media converter into the bracket and align the its mounting holes with those on the DINRAIL bracket as shown in the figure for your media converter. Secure the media converter to the bracket using the two M3 mounting screws provided. 1517 Figure 1 - Attaching the DINRAIL Bracket to an AT-MC10x, AT-MC1004, AT-MC1008/GB, AT-MC1008/SP,...

This manual is also suitable for:

Dinrail mounting bracket