Advertisement
Quick Links
Datasheet |
Media Converter Accessories
AT -WLMT
Wall-mount Kit for Standalone Media Converters
AT -WLMT -010
10 Units of Wall-mount brackets
Overview
The AT-WLMT is a simple metal bracket that
allows the majority of Allied Telesis' range of
standalone media and converters and rate
(bridging) converters to be wall-mounted.
Mounting Option Requirements
The majority of media converters are used to
convert fiber optic connections to copper. Many
installations require these media converters to
be installed in a 19-inch chassis, using a range of
mounting options including AT-TRAY1, AT-TRAY2
and the AT-MCR12. However, other applications
such as Fiber-To-The-Home (FTTH), etc, require
a small un-obtrusive mounting option that can
be discretely placed on a wall or under a table
top.The AT-WLMT was designed to meet this
demand.
Simple Installation
Each AT-WLMT has two circular holes and two
'key' slots on the base.The use of the circular
holes allows two countersunk screws to mount
the bracket on a horizontal surface underneath
a table top, whilst the two key slots allow the
bracket to be easily wall-mounted.
Security
Any media converter or rate (bridging) converter
mounted in an AT-WLMT chassis is held securely
in place by means of a locking screw.This ensures
that the media converter is not easily removed,
thus helping to prevent accidental breakage of
the fiber optic cable connected to the device, and
also theft of the actual unit.
USA Headquarters
|
19800 North Creek Parkway
European Headquarters
|
Via Motta 24
Asia-Pacific Headquarters
|
11 Tai Seng Link
www.alliedtelesis.com
© 2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
Technical Specifications
Physical Specifications
Dimensions
12.7cm x 3.1cm x 12.7cm
(W x D x H)
3.0 x 1.2 x 3.0 in
Weight
0.46 lbs
0.210 kg
Package Contents
10 x AT-WLMT Brackets
10 x Wall-mount kits
1 x Install Guide
Environmental Specifications
Maximum Operating Temperature: -25°C to 70°C
Maximum Storage Temperature: -25°C to 70°C
Operating and Storage Altitude: Up to 3,048m
Relative Humidity
Operating and Storage:
|
Suite 200
|
Bothell
|
|
6830 Chiasso
|
Switzerland
|
T: +41 91 69769.00
|
Singapore
|
534182
|
T: +65 6383 3832
(-13°F to 158°F)
(-13°F to 158°F)
(10,000ft)
5% to 95%
(non-condensing)
WA 98011
|
USA
|
T: +1 800 424 4284
|
F: +41 91 69769.11
|
F: +65 6383 3830
Key Features
•
Allows standalone Media Converters and Rate
Converters to be wall-mounted
•
Allows standalone Media Converters and Rate
Converters to be mounted under desks
•
Securely locks mechanism
•
Simple Installation
•
Supplied complete with mounting screws
Ordering Information
AT-WLMT-010
10 Units of Wall-mount brackets
Associated Products
AT-TRAY1
Single unit rack-mount bracket for MC products
AT-TRAY4
Four unit rack-mount bracket for MC products
AT-MCR12
12 Slot rack-mountable chassis, for standalone Media
Converters, including internal AC or DC power
|
F: +1 425 481 3895
617-000126 Rev B
Advertisement
