Dryer Use; Starting Your Dryer - Maytag MGDE300VF - Performance Series 27-in Gas Dryer Use And Care Manual

DRYER USE
3000 SERIES
MCT Maytag L0 X Xe cia[ echn0 0ty
power * car_ce
o 0
co_t_o[ [0_k
_elicate
quick dry
start • pause
©
©
t_e _d_st
p,ev_t
m h_h
m iz_edium B more dry
m low Im,,0rm_
m a_r Ir_ II _ss _'V
mo_ile_
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
This manual covers several different models. Your dryer may not have all of the cycles and
features described.
The following is a guide to starting your dryer. Please refer to specific sections of this manual
for more detailed information.
1. Clean lint screen before each load. See "Cleaning the lint Screen."
2. Place laundry in dryer and shut door.
3. Press the POWER/CANCEl_ button then rotate the dial to select either a Sensor or Timed
Cycle. The preset settings and drying time for the cycle chosen will be displayed.
NOTE: A default time is displayed when a Sensor Cycle is selected. During the first few
minutes of the drying process, the cycle time may automatically vary from the default
time based on the size and fabric type of the load. Toward the end of the drying process,
the estimated time display will adjust again, showing the final drying time.
To use a Sensor Cycle
NOTE: A light next to each feature will glow yellow when the feature is selected. The light
will not glow when the selection is unavailable with the cycle or option combinations
selected.
•
Press the POWER/CANCEl. button.
•
Rotate the dial to select a Sensor Cycle.
16