Unpacking And Assembling The Printer - Epson SureColor S50670 Setup Manual

|

Unpacking and Assembling the Printer

2
Unpacking and Assembling the Printer
Note: Unless otherwise indicated, the illustrations in this manual show the S30670, but the instructions apply to
all three models.
Before beginning assembly, make sure you have sufficient space to set up and use the printer. The
following illustration shows the minimum space required for using the printer:
19.7 in (500 mm)
142.5 in (3620 mm)
When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations
subject to direct sunlight, excessive heat, humidity, or dust. Be sure the printer is placed on a flat, stable
location that can support the following weight for each printer:
•
S30670 - 483 lb (219 kg)
•
S50670 - 524 lb (238 kg)
•
S70670 - 504 lb (229 kg)
WARNING: Six people are required to unpack and install the printer.
You need an even larger floor space to assemble the printer and stand, so be sure to prepare a large, clear
area before unpacking them. Also make sure you save the box and packaging in case you need to ship the
printer later.
3.9 in (100 mm)
39.4 in (1000 mm)
68.9 in
(1750 mm)
39.4 in
(1000 mm)
114.3 in (2903 mm)
19.7 in (500 mm)