Unpacking And Assembling The Printer - Epson SureColor T5270D Setup Manual

Unpacking and Assembling the Printer

Note: Unless otherwise indicated, the illustrations in this manual show the Epson
instructions apply to all five models.
Before beginning assembly, make sure you have sufficient space to set up and use the printer. The
following illustrations show the minimum space required for using the printer:
SureColor T3270/T5270/T7270
5.9 in. (150 mm)
0.39 in.
(10 mm)
23.6 in.
(600 mm)
When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations
subject to direct sunlight, excessive heat, humidity, or dust. Be sure the printer is placed on a flat, stable
location that can support the following weight for each printer:
•
SureColor T3270
•
SureColor T5270
•
SureColor T7270
•
SureColor T5270D
•
SureColor T7270D
WARNING: Two people are required to unpack and install the SureColor T3270 printer; four people are required
to unpack and install the SureColor T5270, T5270D, T7270, and T7270D printers.
You need an even larger floor space to assemble the printer and stand, so be sure to prepare a large, clear
area before unpacking them. Also make sure you save the box and packaging in case you need to ship the
printer later.
5.9 in. (150 mm)
— 148 lb (67 kg)
— 185 lb (84 kg)
—
203 lb (92 kg)
—
260 lb (118 kg)
— 293 lb (133 kg)
Unpacking and Assembling the Printer
SureColor T5270D/T7270D
5.9 in. (150 mm)
0.39 in.
(10 mm)
19.7 in.
(500 mm)
® SureColor ® T7270, but the
3.9 in.
(100 mm)
5.9 in. (150 mm)
|
3