Marking The Media Loading Position - Epson SureColor S50670 Setup Manual

Marking the Media Loading Position

Before loading the media, you need to mark the loading position on the printer using the procedure below.
This procedure helps ensure that your media feeds into the printer straight.
Insert the adjustment paper into the front of the printer as shown.
1.
Align the bottom of the adjustment paper with the bottom of the lower label on the after heater. Make
2.
sure the right side of the adjustment paper is aligned with the longest scale marks on both of the labels
as shown. After aligning the adjustment paper, lower the media loading lever.
Marking the Media Loading Position |
25