Test Range; Sample Prints - Epson Stylus Pro 7600 - UltraChrome Ink - Stylus Pro 7600 Print Engine Product Support Bulletin

Stylus Pro 7600/9600 Printer Service Utility
1.

TEST RANGE

- This represents the range paper feeding will be adjusted. This value can be typed
in the Beginning and End fields, or by using the sliders labeled Beginning and End, both methods
achieve the same results. To remove white bands move the sliders toward –70. To remove dark
bands move the sliders toward +70. You will need to reprint the image with each new setting until
the banding is eliminated.
2.

SAMPLE PRINTS

range specified with the Beginning and End value. You will then make a visual observation of the
test prints and determine which image has the least amount of banding, a value is printed next to
each image. Then you will change the new Beginning and End values slightly above and below the
value of the image you determined had the least amount of banding previously. Click the
Custom Paper Configuration
BUTTON - The Sample Prints button will print a test image five times within the
8/26/02
Sample
Page 17.