Firmware Update - Epson Stylus Pro 7600 - UltraChrome Ink - Stylus Pro 7600 Print Engine Product Support Bulletin

Stylus Pro 7600/9600 Printer Service Utility
The firmware update option of the EPSON Stylus Pro 7600/9600 Printer Utility program allows you to
update the printers firmware without the need of entering a special service menu on the actual printer
itself. The version of firmware data is specific for the utility program and comes in the following format
(BW or BN3024_Q.UPG, where 3024 = firmware data). If the firmware is not tagged with the _Q, visit
the EPSON web site at http://support.epson.com or contact EPSON Technical Support to obtain the
latest version for the utility program. The following procedure outlines the process of updating the
printers firmware using the printer utility program.
Note 1: The firmware listed in this procedure is for demonstration purposes only and may not reflect
the most current versions. Please visit http://support.epson.com for any updates.
Note 2: The standard EPSON Printer Driver and Status Monitor 3 must be installed and properly
working for the utility to function.

Firmware Update

Firmware Update
8/26/02
Page 28.