Setting The Range Of Addresses To Do An Automatic Search And Registration; Procedures For Automatic Search - Epson EMP Monitor V4.21 Operation Manual

Registering and deleting projectors for monitoring
5
To end the registration operation, click the
top-right corner of the window or click [Cancel].
The icon(s) of the projector(s) you registered will be displayed
in "Grouping view" or "Detail list view".
Refer to "Monitoring window layout" for details on using the
"Grouping view" and "Detail list view".
Setting the range of addresses to do an automatic
search and registration
TIP
Projectors that are using a serial
cannot be detected.
PROCEDURE

Procedures for automatic search

f
Right-click in "Grouping view" and select "New" -
1
"Projector (automatic search)".
The "Create new projector (automatic registration)" window
will be displayed.
• If "Detail list view" is displayed, select "New" - "Projector
(automatic search)" from the "Edit" menu.
in the
p.17
s
⇔
TCP/IP conversion adapter
Select the "Specify an address range and search"
2
check box and then enter the starting address and
ending address in the range.
Click [Search].
3
Automatic searching will be carried out, and the names of the
projectors that have been detected will be displayed.
10