Color Density - Epson Stylus Pro 7600 - UltraChrome Ink - Stylus Pro 7600 Print Engine Product Support Bulletin

Stylus Pro 7600/9600 Printer Service Utility
hand corner. You can reprint the test pattern at the other quality modes for the media then choose
which Quality mode produces the best print for the current Custom Paper Configuration.
3. Click Next to confirm your selection and continue with other configuration choices.

COLOR DENSITY

This setting controls the ink saturation of all colors in 1-percent increments within a range of –50 to +50. Too much ink
being laid down on a media causes the ink to puddle and bleed, or the paper to become wet and limp causing it to
have ripples. The ink at the high spots of the ripples will be more saturated or darker giving the appearance of vertical
banding. Reducing the density or saturation of ink on the media will prevent the media from becoming wet and will
eliminate the ripples and vertical banding. Horizontal banding can be noticed if the color density is set too low.
1. Position the slider
type a density percentage within the range of +50 to -50 in the
Custom Paper Configuration
toward +50 to increase density or toward -50 to decrease density. You can also
value box.
8/26/02
Page 22.