Installing Lexmark Document Distributor; Minimum And Recommended System Requirements - Lexmark C792 Administrator's Manual

Installing Lexmark Document Distributor

Minimum and recommended system requirements

Server, load balancer, and database components
Category
Operating system
Processor
RAM
Hard disk drive
Requirement
•
Windows Server 2008 Standard
Edition with SP2 (32-bit only)
•
Windows Server 2003 R2 Standard
Edition with SP2 (32-bit only)
•
Windows Server 2003 Standard
Edition with SP2 (32-bit only)
2GHz dual-core
2GB
20GB free space for each system
component
Note: The listed space requirement
includes both space for the application
and free space for operation, but
requirements may vary depending on
system complexity and number of jobs.
Installing Lexmark Document Distributor
18
Recommended for enterprise
systems
Windows Server 2003 R2 Standard
Edition with SP2
Dual 2.5GHz quad-core Intel Xeon
4GB
Configuration 1-N, X-N, or X-Y-N:
•
Database and load balancer
–
Operating system and server
configured for LMC installed on
two 15,000 RPM Serial-Attached
SCSI drives configured as a
RAID 1 array with at least 80GB
free
–
Database and load balancer
installed on four 15,000 RPM
Serial-Attached SCSI drives
configured as a RAID 5 array,
with at least 300GB free
•
Servers
–
Operating system and server
configured for jobs installed on
four 15,000 RPM
Serial-Attached SCSI drives
configured as a RAID 5 array
with at least 80GB free
Note: For information about cofiguring
servers for only LMC or jobs, see
"Assigning servers to only run LMC or
process jobs" on page 59.