Using Ldd Without Dns; Upgrading From Ldd 4.4 - Lexmark C792 Administrator's Manual

3
Run the batch file again using the appropriate options as shown in the usage instructions.
4
Follow any other instructions presented in the command prompt window.

Using LDD without DNS

If a reliable DNS is not available on the network where you are installing LDD:
1
Configure static IP addresses on all components in the system.
2
For each component in the LDD system, add the fully qualified domain names of all components in the system
to the Windows hosts file.
For example:
10.10.250.12
10.10.250.15
10.10.250.101
10.10.250.115
10.10.250.127
3
In the file \Lexmark\Solutions\apps\wf-ldss\WEB-INF\classes\server.properties where each LDD server is installed,
make sure the properties server.promptSessionServerAddress and
server.canonicalhostname are set to the IP address of the server, rather than the host name.
4
In the file \Lexmark\Solutions\apps\wf-ldss\WEB-INF\classes\adaptor.properties where each LDD server is
installed, make sure the properties adaptor.address and adaptor.canonicalhostname are set to the
IP address of the load balancer, rather than the host name.
Notes:
•
If one of the above properties files is changed on a server, the Lexmark Solutions Application Server should
be restarted from the Windows Services control panel on that computer.
•
These properties are not saved during an upgrade. If you upgrade your LDD system, you must repeat steps
3 and 4.

Upgrading from LDD 4.4

If LDD 4.4 is already installed, you can upgrade components to LDD 4.5 in all configurations.
Notes:
•
The Install Software Updates option in the LDD installation package cannot be used to install a new
maintenance release of LDD 4.5 on an existing LDD 4.5 system (version 4.5.x to 4.5.y or version 4.5.x.m to
4.5.x.n). A patch for existing systems is available with each maintenance release. This option is, however, used
to upgrade an existing LDD 4.4 system to the latest maintenance release of LDD 4.5.
•
When using a backup system, you must apply any patches or upgrades to both the primary system and the
backup system.
myloadbalancer.mydomain.com
mydatabase.mydomain.com
myserver1.mydomain.com
myserver2.mydomain.com
myserver3.mydomain.com
Installing Lexmark Document Distributor
# LDD load balancer server
# LDD database server
# LDD server 1
# LDD server 2
# LDD server 3
37