Installing A Workgroup System; Configuration Type For Workgroup Systems; Installation Overview For A Workgroup System; Installing System Components In A Workgroup System - Lexmark C792 Administrator's Manual

Installing Lexmark Document Distributor

Installing a workgroup system

Configuration type for workgroup systems

Configuration type and its advantages and disadvantages
Description
Database (DB), load balancer (LB), and server on a single computer

Installation overview for a workgroup system

1
Configure the computer where to install LDD on the network.
2
Activate and download licenses.
3
Install LDD using a workgroup installation.
4
Change the administrator password, and optionally, the administrator user name.
5
Temporarily set servers online to test function.
Note: Because software clients are managed differently than printers, client software is installed later in the system
setup process. For information about installing client software and managing software clients, see "Managing
software clients" on page 109.

Installing system components in a workgroup system

1
From the LDD installation package, run Setup.exe.
2
From the Lexmark Solutions installation window, click Install Workgroup System.
3
Click Agree to accept the license agreement.
4
Specify the folder where the server software should be installed, and then click Next.
5
If multiple network adapters are present, then select the network containing your printers by selecting the IP address
of the server on that network, and then click Next.
DB
LB
Server
Advantage Disadvantage
Minimum No failover for database or load
equipment balancer, limited resources
27