Reset Color Cal; Reports; Menu Settings Page; Event Log - Lexmark C540 Service Manual

Reset Color Cal

This setting allows the device to adjust the alignment of the color planes using pre-programmed default values.
To reset the programmed value:
1.
Select TPS Setup from Diag Menu, and press Select (
2.
Select Reset Color Cal, and press Select (
Resetting appears. When the reset is complete, the screen is automatically returned to TPS Setup.

Reports

Menu Settings Page

To print the Menu Settings Page:
1.
Select Reports from Diag Menu, and press Select (
2.
Select Menu Settings Page, and press Select (

Event Log

Display Log

The event log provides a history of printer errors. It contains the most recent errors that have occurred on the
printer. The most recent error displays in position 1. If an error occurs after the log is full, the oldest error is
discarded. Identical errors in consecutive positions in the log are entered, so there may be repetitions. All 2xx
and 9xx error messages are stored in the Event Log.
To view the event log:
1.
Select Event Log from Diag Menu, and press Select (
2.
Select Display Log, and press Select (
As many error codes display as fit on the screen at a time. Press
Press to view additional details.
Press Back ( ) to return to the Event Log menu.
).
).
).
).
).
).
or
5025-2xx, 4xx
to view additional error codes.
Diagnostic aids
3-21