Removing The Lcd Section And The Led Pcb; Removing The Pcb Case Unit; Removing The Bottom Case Unit And The Handle Unit; Removing The Cd-Rom Drive - Panasonic CF-72X3UUBDM - Toughbook 72 - Pentium 4-M 1.8 GHz Service Manual

6.7 Removing the LCD Section and
the LED PCB.
LED Section
<S>
1. Remove the two screws <S>, and remove the LCD unit.
2. Remove the two screws <G>, and remove the LED PCB.
Screw <S>: DFHE5025XA
Screw <G>: DXHM0021ZA

6.8 Removing the PCB Case Unit.

<A>
<A>
<A>
1. Remove the six screws <A>, and two screws <B>.
2. Remove the PCB case.
Screw <A>: XYN2+J12FZ
Screw <B>: XYN2+J16FN
<G>
LED
<S>
LED PCB
Figure 15
<B>
<A>
PCB Case Unit
Figure 16
6.9 Removing the Bottom Case Unit
and the Handle Unit.
<D> <F>
Bottom Case Unit
1. Remove the two screws <D>, and two screws <F>.
2. Remove the bottom case unit, and remove the handle
unit.
Note : When reassemble the bottom case unit, install the power
knob before installation of the bottom case unit.
Screw <D>: XTB2+16GFN
Screw <F> : XTB26+20GFN

6.10 Removing the CD-ROM Drive.

1. Release the connector to remove the CD-ROM drive.
6 - 4
<F> <D>
Power knob
Handle Unit
Figure 17
CD-ROM Drive
Release the Connector
Figure 18