Disassembly/Reassembly; Removing The Battery Pack; Removing The Hdd Unit; Removing The Palmrest Unit, The Pad Pcb And The Touch Pad - Panasonic CF-72X3UUBDM - Toughbook 72 - Pentium 4-M 1.8 GHz Service Manual

6. Disassembly/Reassembly

Note: Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode;
abnormal operation may result.

6.1 Removing the Battery Pack.

Slide
Battery Cover Unit
1. Slide the latch, and then without releasing it, slide and
remove the battery cover unit.
Lift up
Battery Pack
2. Lift up the tab and remove the battery pack.
Slide
Figure 1
Tab
Figure 2

6.2 Removing the HDD Unit.

Tab
1. Remove the two screws <V>.
2. Put down the tab, and lift up the HDD unit.
Screw <V>: DFHE5061ZA
6.3 Removing the Palmrest Unit, the
PAD PCB and the Touch Pad.
1. Remove the two screws <D>.
Screw <D>: XTB2+16GFN
6 - 1
<V>
HDD Unit
Figure 3
<D>
Figure 4