Removing The Led Pcb, Main Pcb, Vga/Cpu Heat Sink, Fan, I/O Plate And Com Pcb - Panasonic CF-48 Service Manual

6.13. Removing the LED PCB, MAIN
PCB, VGA/CPU Heat Sink, Fan,
I/O Plate and COM PCB.
Figure 23
1. Remove the two screws <P>, and remove the LED PCB.
2. Remove the four screws <E>, and remove the FDD guide
plate and the tilt support L.
Screw <P>: DXSB26+4FZMT
Screw <E>: XTB26+8G
Figure 24
3. Remove the screw <F> and six hex. screws <N>.
4. Remove the main PCB section.
Screw <F>: DXSB26+4FZMT
S crew <N>: IKT0104AA
5. Remove the shaft spacer and two screws <L>, and remove
the I/O plate.
6. Remove the three H/Sink spacers and two screws <O>,
and remove the CPU/VGA heat sink, CPU/VGA heat sink
top plate and CPU/VGA heat sink bottom plate.
7. Remove the two screws <M>, and remove the fan.
Remove the two screws <K>, and remove the COM PCB.
Screw <L>: XYN2+J6
Screw <O>: DXHM0009YA
Screw <M>: XYN25+J5FZ
Screw <K>: DFHE5121YA
6 - 6
Figure 25