6.11 Removing the Main PCB.
Modem
Jack
Cover
Open
Port
Open
Cover R
1. Remove the two screws <E>.
2. Open the modem jack cover , port cover R and the port
cover L.
Screw <E>: XTB2+5GFN
Release
Open
3. Open the DC jack cover, and release the DC jack.
Push in
Modem Jack Cover
4. Push in the modem jack cover, and remove the main
PCB.
<E>
Port
Open
Cover L
Figure 18
Minus Screw Driver
Main PCB
DC Jack
Modem Jack Cover
Figure 19
Main PCB
Figure 20
6.12 Removing the Fan and the Fan
Heat Angle.
Lift Up
1. Disconnect the connector CN811.
2. Remove the two screws <C>, and remove the fan.
3. Remove the two screws <S>, and remove the fan heat
angle.
Screw <C>: XYN2+J6FN
Screw <S>: DFHE5025XA
6 - 5
Figure 21
Fan
CN811
<C>
Fan Heat Angle
Figure 22
CN811
<S>