Installation; Before Installing The Operating System; Installing The Operating System - HP ML310 - ProLiant - G2 User Manual

Software for microsoft windows small business server
Hide thumbs Also See for ML310 - ProLiant - G2:
Table of Contents

Advertisement

Installation

Before installing the operating system

IMPORTANT:
connect the server hardware as described in the server user guide. Do not install additional
hardware devices until after the software installation is complete.
IMPORTANT:
located in subdirectories in this path. To view the directory, click Browse.
IMPORTANT:
installed and the server must be connected to an active network connection.
IMPORTANT:
1.5 GB partition is required for BitLocker support. Do not delete or format the 1.5 GB system
partition.
IMPORTANT:
upgrade Disk - 0 to Dynamic disk. With Dynamic disk, you cannot set partition 1 as active,
which is needed to enable BitLocker.

Installing the operating system

Power up the server. The HP Welcome screen appears.
1.
At the HP Welcome screen, press the appropriate key to continue. The server software license screen
2.
appears.
To accept the license agreements, press the appropriate key.
3.
Choose from the following options:
4.
Select the Typical disk space option. This option sets the partition size to 60 GB.
o
Select the Custom disk space option. This option enables you to set the partition size over 60 GB
o
to the maximum disk capacity.
Choose from the following options:
5.
Yes—To enable BitLocker, set 1.5 GB system partition is set active. Install the BitLocker feature.
o
For more information, see the Enabling BitLocker drive encryption (on page 17) section.
No—To enable BitLocker later, set the second partition to active. The operating system boots
o
from the partition. For more information, see the Enabling BitLocker drive encryption (on page
17) section.
Read the Software license agreement and press the appropriate key.
6.
Before powering up the server and configuring the operating system software,
If prompted for HP driver files, enter the path C:\Drivers. Driver files are
To successfully complete the software installation, TCP/IP services must be
Operating system ships with 2 partitions. 1.5 GB and 60 GB respectively. The
If BitLocker support is not chosen during the initial operating system setup, do not
Installation 10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Factory-installed operating system

Table of Contents