Remote Control - Dynex DX-19E220A12 User Manual

TV components

Remote control

INPUT
1 1
4 4
7 7
INFO
MENU
VOL
VI DEO
COMP
ZOO M
PICTURE
# Button Description
Press to open the INPUT SOURCE list, then
press
1 INPUT
For more information, see "Selecting the
video input source" on page 19.
Press to enter channel numbers and the
2 Numbers
parental control password.
Press to enter a digital sub-channel number.
.
3 For more information, see "Selecting a
(Dot)
channel" on page 20.
Press to display TV status information, such
as the channel number, channel name (if
4 INFO available), or signal source. For more
information, see "Viewing program
information" on page 21.
Press to navigate through the on-screen
5
menus and adjust settings.
6 ENTER Press to confirm selections or changes.
7 MENU Press to open the on-screen menu.
Press to mute the sound. Press again to
MUTE
8
restore the sound.
POWER
2 2 3 3
5 5 6 6
8 8 9 9
RECALL
0 0
GUIDE
EXIT
MUTE
CH
FAVORITE
HDMI TV
MTS/SAP VGA
SLEEP CH-LIST
AUDIO CCD
or to select a video input source.
# Button Description
9 VOL+/VOL– Press to increase or decrease the volume.
Press to select the input source.
VIDEO—Press to select the device
connected to the AV IN jacks.
HDMI—Press to select the device connected
to the HDMI jack.
10 Video Input
TV—Press to select the TV input source.
COMP—Press to select the device
connected to the COMPONENT video jacks.
VGA—Press to select the device connected
to the PC IN VGA jack.
Press to set the sleep timer. For more
11 SLEEP information, see "Setting the sleep timer" on
page 34.
Press to select the aspect ratio. For more
12 ZOOM information, see "Adjusting the TV picture"
on page 21.
Press to select the picture mode. You can
select Vivid, Standard, Energy Saving, or
13 PICTURE
Custom. For more information, see
"Adjusting the TV picture" on page 21.
Press to turn your TV on or off (Standby
mode). When your TV is off, power still flows
14 (Power)
into it. To disconnect power, unplug the
power cord.
15 RECALL Press to go to the last viewed channel.
Press to display the program guide. For more
16 GUIDE information, see "Viewing program
information" on page 21.
17 EXIT Press to close the on-screen menu.
Press to go to the next or previous channel
18 CH+ / CH– in the channel list. For more information, see
"Selecting a channel" on page 20.
Press to open the Favorites channel list. For
more information, see "Setting up a favorite
19 FAVORITE
channel list" on page 25 and "Viewing a
favorite channel" on page 25.
In analog TV mode, press to select Stereo,
20 MTS/SAP Mono, or SAP. For more information, see
"Adjusting sound settings" on page 23.
CH-LIST
21 Press to open the channel list.
Press to turn closed captioning on or off. You
can select On, Off, or CC On Mute. For more
22 CCD
information, see "Turning closed captioning
on or off" on page 31.
Press to select an audio mode. You can select
Standard, News, Music, Movie, or Custom.
23 AUDIO
For more information, see "Adjusting sound
settings" on page 23.
7
DX-19E220A12