Adjusting The Computer Image - Dynex DX-19E220A12 User Manual

22
DX-19E220A12
• Aspect Ratio—Selects the aspect ratio of the
picture.
Aspect ratio option
Normal:
Displays the original 4:3
aspect ratio with vertical
black bars on the left and
right of the image. If the
original aspect ratio is 16:9,
the image displays in 16:9.
Zoom:
Expands the image to fill the
screen. The top and bottom
of the image may be
cropped.
Wide:
Use this option to view
content recorded in a 16:9
(wide-screen) aspect ratio.
Cinema:
Stretches the image at the
edges, but keeps a clear
image in the center.
Auto:
The picture display is
adjusted to the correct
aspect ratio automatically
(TV mode only). This setting
is only active when Auto
Zoom in the Channels menu
is set to On.
You can also press ZOOM to select the aspect ratio.
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, Strong,
or Off.
• Overscan—This feature extends part of the
display past the visible area of the screen. The
resulting picture will "zoom in" on the image
center. You can select On or Off.
• Advanced Contrast—Opens a sub-menu
where you can adjust the following:
• Adaptive Contrast–Automatically
adjusts picture detail and brightness. You
can select On or Off.
• Dynamic Contrast Ratio—Enhances the
contrast ratio between light and dark
areas of the picture. You can select On or
Off. If this is set to On, Backlight cannot
be adjusted.
• Reset Picture Settings—Reset all picture
settings to factory mode.
4
Press MENU to return to the previous menu, or press
EXIT to close the menu.
Example

Adjusting the computer image

To adjust the computer image:
1
Make sure that your TV is in VGA mode. For more
information, see "Selecting the video input source"
on page 19.
2
Press MENU. The on-screen menu opens with the
Picture menu displayed.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Reset Picture Settings
Move
Adjust settings to affect picture quality.
3
Press or to highlight Settings, then press . The
Settings menu opens.
Parental Controls
Time
Closed Caption
Menu Settings
Computer Settings
Input Label
System Info
Restore Default
Move
Set options for when a computer is connected to the TV.
4
Press or to highlight Computer Settings, then
press ENTER. The Settings-Computer settings menu
opens.
Auto Adjust
H . Position
V . Position
Clock
Phase
Reset Computer Settings
Move
Adjust to the PC signal timing automatically when ON.
5
Press or to highlight an option, then press
to adjust the option. You can select:
• Auto Adjust—Automatically adjusts the image
settings such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
• Clock—Adjusts the sample frequency.
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets computer
settings to factory default.
6
Press MENU to return to the previous menu, or press
EXIT to close the menu.
Adjusting the picture
Custom
70
40
60
0
50
30
Select Back Exit
MENU EXIT
Select Back Exit
MENU EXIT
70
40
60
50
Select Back Exit
MENU EXIT
or