Dynex DX-19E220A12 User Manual page 14

10
DX-19E220A12
Using component video (better)
To connect a cable or satellite box using component
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to
the COMPONENT IN/Y, P
your TV and to the component video out jacks on
the cable or satellite box.
Back of TV
VIDEO
AV IN
COMPONENT IN Y
4
Connect an audio cable (not provided) to the L and
R audio jacks on the back of your TV and to the
audio out jack on the cable or satellite TV box.
5
Turn on your TV, then turn on the cable or satellite
box.
6
Go through the setup wizard on page 18.
, P jacks on the back of
B R
Cable or satellite box
Audio cable
AUDIO R
P
L R
R
Cables are often
color-coded to match
color-coded jacks.
P P
B R
Using composite video (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a composite cable (provided) to the VIDEO,
L, and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or
satellite box.
Back of TV
L
VIDEO AUDIO R
AV IN
COMPONENT IN Y
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 18.
Making connections
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
Composite cable
R
P P
B R