Switching Off The Dishwasher - Electrolux U04306 ANC 822 User Instructions

Switching Off the Dishwasher

When the wash programme is finished:
1. Turn the program selector to the I position.
Hot steam may escape if the door is opened
1
immediately after the end of the programme.
Therefore:
2. Open the door carefully.
Emptying the Dishwasher
Hot dishes are sensitive to knocks. The
3
dishes should therefore be allowed to cool
down before removing them from the appli-
ance.
• The dishes will dry quicker if, when the pro-
gramme has finished, you briefly open the door
fully and then leave it slightly ajar.
• Leave the dishes in the dishwasher for approx. 15
minutes after the end of the programme so that
they dry better and can cool down.
• Empty the lower rack first, then the upper rack. In
this way you will avoid any water left on the upper
rack dripping onto the dishes in the lower rack and
causing water spots.
Please note, that if your dishwasher is
1
installed under a kitchen worktop, escaping
steam may damage the worktop. Its under-
side must be protectad against rising steam
with aluminium foil as prescribed.
18