Logging In As A System Administrator - Oki CX4545 MFP Manual

3.OVERVIEW OF e-Filing WEB UTILITY
 Logging in as a system administrator
To log in as a system administrator, follow the steps below after launching the e-Filing web utility.
"System administrator" and "User with an administrator privilege" are defined as follows in this manual.
- System administrator:
User with the administrator role
- User with an administrator privilege:
User whose ID is "Admin"
1
Click the Log-in link located at the upper right of the page.
The Administrator Log-in page is displayed.
2
Enter the administrator password in the [Password] box and click [Login].
The [Administration] tab appears in the main tabs.
 If you enter an invalid authentication password several times to log into the e-Filing web utility in the
administrator mode, you may not be able to login for a certain period since it will be regarded as an
unauthorized access.
 To log off from the e-Filing web utility in the administrator mode, click the Log-out link and be sure to close
your web browser to prevent unauthorized access by other users.
 The administrator password is the same as the password that has been set in the TopAccess or touch panel
display for the administrator. The default administrator password is "123456" if you have not changed it.
 The password input is displayed in the blank symbols.
3 OVERVIEW OF e-Filing WEB UTILITY
Getting Started With the e-Filing Web Utility 37