AGFA SR 24 iT Operator's Manual page 88

System Settings
The print func- After a toner empty condition is detected,
tion at the time of this function allows you to select either to
Toner Empty stop printing or continue printing
detection
(PR mode only)
Auto Film For- The Auto Format Select Print Function is
mat Select print enable or disable through the control
function panel.
(PR mode only) This function is used for managing hori-
zontal and vertical printing when Letter
or A4 size paper is set crosswise/length-
wise into the paper feeding tray/paper
feeding cassette.
90 degree rotation Enables the prism to rotate the screen
setting image 90 degrees.
Automatic paper Allows you to specify the paper source
source switching when Letter or A4 size paper is loaded in
(A3/A4 Laser
Lengthwise or Crosswise orientations
Printer only)
into the both paper feeding tray and paper
feeding cassette.
Auto switching: Printing continues by
automatically switching to the remaining
paper source after paper in the specified
paper source runs out.
Disabling Auto Switching: A paper
empty mode occurs and printing ceases
after paper in the specified paper source
runs out. The paper source must be
refilled or the paper source must be
switched by pressing the Output Selec-
tion Key in order to resume printing.
* To change any of the system settings described above, contact your authorized
dealer.
Description
2. Initial Settings List
Selection Initial Setting
√
Disable
Print
Enable
Print
Enable
√
Disable
Enable
√
Disable
√
Auto
switching
Disabling
Auto
Switching
4-7