First Use; Set Water Softener - Electrolux ESL 63010 User Manual

First use

Before using your dishwasher for the
first time:
Ensure that the electrical and
●
water connections comply with the
installation instructions
Remove all packaging from inside
●
the appliance
Set the water softener
●
Pour 1 litre of water inside the salt
●
container and then fill with
dishwasher salt
Fill the rinse aid dispenser
●
When using combi detergents
tablets («3 in 1», «4 in 1», «5 in 1»,
etc...) follow the instructions given
in "Use of detergent".
Water hardness
Clarke °TH
64 - 88 91 - 125
53 - 63 76 - 90
46 - 52 65 - 75
36 - 45 51 - 64
28 - 35 40 - 50
23 - 27 33 - 39
18 - 22 26 - 32
13 - 17 19 - 25
5 - 12 7 - 18
< 5 < 7
* no salt is necessary
Adjusting the water
mmol/l manually
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
Set the water softener
The dishwasher is equipped with a
water softener designed to remove
minerals and salts from the water
supply, which would have a
detrimental or adverse effect on the
operation of the appliance.
The higher the content of these
minerals and salts, the harder your
water is.
Water hardness is measured in
equivalent scales, Clarke degrees
(°dH), French degrees (°TH) and
mmol/l (millimol per litre - international
unit for the hardness of water).
The softener should be adjusted
according to the hardness of the
water in your area. Your local Water
Authority can advise you on the
hardness of the water in your area.
hardness setting
electronically
2 level 10
2 level 9
2 level 8
2 level 7
2 level 6
2 level 5
1 level 4
1 level 3
1 level 2
1 level 1
first use electrolux 11
Use of
salt
yes
yes
yes
yes
yes
yes
yes
yes
yes
no *