ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Always use a correctly installed shock- pliance, carefully read the supplied in- proof socket. structions. The manufacturer is not re- • Do not use multi-plug adapters and ex- sponsible if an incorrect installation and tension cables.
Page 4
www.electrolux.com • Do not drink and play with the water in 1.3 Use the appliance. • This appliance is intended to be used in • Do not remove the dishes from the ap- household and similar applications such pliance until the programme is comple- ted.
www.electrolux.com Indicators Description Rinse aid indicator. This indicator is off while the programme oper- ates. Salt indicator. This indicator is off while the programme operates. 4. PROGRAMMES Degree of Programme Duration Energy Water Programme soil phases (min) (kWh) Type of load Heavy soil Prewash 120 - 130 1.8 -...
ENGLISH 5. OPTIONS 5. Wait until the programme indicator (A) 5.1 Acoustic signals goes off and the end indicator comes The acoustic signals operate in these on (the programme indicator (B) con- conditions: tinues to flash). • When the programme is completed. •...
ENGLISH 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt contain- er (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container.
10 www.electrolux.com 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the appli- ance door.
ENGLISH • When the countdown is completed, Make sure that there is detergent the programme starts. in the detergent dispenser before you start a new programme. Opening the door while the At the end of the programme appliance operates When the programme is completed, an If you open the door, the appliance stops.
12 www.electrolux.com • Do not put in the appliance items made • Make sure that the spray arms can of wood, horn, aluminium, pewter and move freely before you start a pro- copper. gramme. • Do not put in the appliance items that can absorb water (sponges, household 8.4 Before starting a cloths).
ENGLISH To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B).
Page 14
14 www.electrolux.com Alarm code Problem • The indicator of the set programme The appliance does not fill with water. flashes continuously. • The end indicator flashes 1 time in- termittently. • The indicator of the set programme The appliance does not drain the water. flashes continuously.
ENGLISH • The quality of the detergent can be the 10.1 If the washing and drying cause. results are not satisfactory Dishes are wet Whitish streaks or bluish layers on • The programme is without a drying glasses and dishes phase or with a low temperature drying •...