Gigabyte G1.Guerrilla User Manual page 93

Create a RAID Array:
In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAID screen
appears (Figure 4).
[ Create New RAID ]
GRAID _
Name:
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size: 240 GB
Confirm Creation
[ RAID Disk Drive List ]
[fg]-Move Cursor [DEL,BS]-Delete Character
The Create New RAID block displays all the items that need to be set for creating an array (Figure 5).
Steps:
1. Enter Array Name: Under the Name item, enter an array name with 1~16 letters (letters cannot be special
characters) and press <Enter>.
2. Select RAID Mode: Under the Level item, use up or down arrow key to select RAID 0 (Stripe), RAID 1
(Mirror) or JBOD (Figure 5). Then press <Enter> to move onto the next step.
[ Create New RAID ]
Name: GRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size: 240 GB
Confirm Creation
[ RAID Disk Drive List ]
[hi]-Switch RAID Level
Gigabyte Technology Corp. RAID Setup Utility v1.07.06
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
[ Help ]
Enter a string between 1 to 16 characters
in length for the created RAID drive to be
identified by system BIOS or OS.
Figure 4
Gigabyte Technology Corp. RAID Setup Utility v1.07.06
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
[ Help ]
RAID 0
RAID 1
JBOD
[ENTER]-Next
Figure 5
- 93 -
Available Type/Status
120 GB Non-RAID
120 GB Non-RAID
Enter RAID Name
[ENTER]-Next [ESC]-Abort
Available Type/Status
120 GB Non-RAID
120 GB Non-RAID
Select RAID Level
- Data striped for performance
- Data mirrored for redundancy
- Data concatenated for huge
temporarily disk required
[ESC]-Abort
Appendix