Gigabyte G1.Guerrilla User Manual page 106

Before installing Windows XP, connect a USB floppy disk drive to your computer. Refer to the following for
installing the driver during the Windows setup process.
Step 1:
Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-
sage "Press F6 if you need to install a 3rd party SCSI or RAID driver." A screen will then appear asking you to
specify an additional SCSI adapter. Press <S>.
Step 2:
For the Intel ICH10R:
Insert the floppy disk containing the SATA RAID/AHCI driver and press <Enter>. Then a controller menu
similar to that in Figure 4 will appear. Select Intel(R) Desktop/Workstation/Server Express Chipset SATA
RAID Controller and press <Enter>. For AHCI mode, use the up arrow key on the keyboard to scroll to the
Intel(R) ICH10R SATA AHCI Controller item and press <Enter>.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) ICH7R/DH SATA RAID Controller
Intel(R) ICH7MDH SATA RAID Controller
Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Intel(R) Mobile Express Chipset SATA RAID Controller
ENTER=Select
For the JMicron JMB362:
Insert the floppy disk containing the SATA RAID/AHCI driver and press <Enter>. Then a controller menu simi-
lar to Figure 5 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and
press <Enter>.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32)
ENTER=Select
Appendix
F3=Exit
Figure 4
F3=Exit
Figure 5
- 106 -